Mobility
What are Changing Places Toilets?
Changing Places Toilets are designed so that they are completely accessible and provide sufficient space and specialist equipment for people who are not able to use the toilet independently. They must be an extra facility, in addition to the accessible toilets for independent use. Standard accessible WC’s are designed for access by a standard wheelchair, but they are unlikely to provide adequate space for a powered wheelchair, or a wheelchair with additional head or leg support fittings. Standard accessible WC’s are also only designed for independent use by the individual and there is usually insufficient room to accommodate a carer /carers if the user requires assistance.
Changing Places give people with profound and multiple disabilities who are unable to use a standard WC or accessible toilet, a safe and dignified facility that provides everything they may need. Without these vital facilities, carers are forced to change loved ones on the floor or be confined to their own homes.
Why do we need Changing Places?
Almost 1 in 5 people have a disability and ensuring we provide suitable toilet facilities are vital to help create equality in our society. Many make the conscious decision not to visit somewhere if they feel they do not have a clean, suitable environment to toilet. These include individuals with profound and multiple learning disabilities, those with cerebral palsy, multiple sclerosis, spina bifida, motor neurone disease, older people or those who have acquired a brain injury. These are the people who need better-equipped public toilets, and if there are no Changing Places, then their needs aren’t being met. Without these facilities people with disabilities and their families cannot take part in activities that most of us take for granted.
Changing Places facilities provide more than the standard accessible toilets. Offering more space and additional equipment ensuring there is room for a powered wheelchair or multiple carers to easily help the user.
An overview of the equipment expected in these facilities include:
- Full room covering ceiling hoist system providing access between changing bench, basin and toilet
- Height adjustable, adult sized changing table/bench
- Peninsular toilet
- Height adjustable washbasin
- Privacy screen or curtain to allow some privacy
- Wide tear-off paper roll to cover the bench
- A large waste bin for disposable pads
- Grab rails where appropriate to provide necessary support
- Emergency alarm cord to summon help if necessary
- A non-slip floor
- A safe & clean environment
- Showering facility (optional)
The Ultimate Standalone Changing Places Solution
What are Modular Changing Places?
Pre-fabricated Changing Places are delivered and lifted into position on-site as a complete unit. This minimises disruption to any existing buildings, whilst accelerating build times and improving quality control. Each unit provides 12sqm of internal floor space, a minimum internal ceiling height of 2.4m and premium equipment throughout. Additional features, such as roof lanterns and internal feature walls, are used to further enhance user experience. Aesthetics can be tailored both inside and out. The external shell can be clad in materials to compliment your existing buildings or environment, plus we provide a wide range of internal colours and finishes. All Modular Changing Places come complete, ready fitted with all the equipment required to meet Changing Places and BS8300-2:2018 standards, with a compliant layout and design, removing all the hassles from your planning:
- Full room covering ceiling hoist
- Wall mounted changing table
- Height adjustable basin
- Peninsular toilet
- All specified ancillary items
- Modular Changing Places look stunning and can be modified to fit into your environment, or can be branded to form a cohesive part of your infrastructure
- They are quick and easy to install, with none of the mess and inconvenience involved with weeks of building works
- Full turnkey option from design to installation
- Rigorously tested equipment for complete peace of mind
- Future-proof – if you ever need to relocate your business, your Modular Changing Place can travel with you
- High-usage – in contrast to many internal adaptations, these standalone facilities are highly visible. As a result, they get used more and help to attract new customers
Astor Aquba: Height Adjustable Wall Mounted Basin
- Compact integrated height adjustable basin
- Great wheelchair access
- Perfect for under-window installations
- Function to preset two heights
- Load bearing hand/towel rails
- Smooth Corian style basin finish
Designed and manufactured in the UK, this stunning basin offers boutique design quality and would make a fine addition to any bathroom. The design was developed in conjunction with customers, and every tiny detail has been thought about and designed to make access and life just a little easier without compromising style. Details include a smooth graduated design to the front of the basin, soft actuation on the click-clack waste, and sculpted minimal casing below the basin.
Key features include the ability to preset two heights to allow dual users in the home to easily switch between their preferred basin heights. Further height adjustments can be made simply by using the up/down arrows. A lockout is available to prevent accidental movement or misuse, and the unit has an anti-trap sensor incorporated.
The Astor Aquba can be wall-mounted at any height to suit the users.
Standard Features: Corian style basin and cover finishes | 300mm smooth height adjustment (<12 seconds) | 150kg maximum load | Integrated control panel | 2 settable height positions | Integrated load bearing rails | Click-clack soft touch waste | Lock-out functionality & anti-trap sensor | 3 Year warranty (Terms and conditions apply).
The Home Lift Seat
It lowers disabled people onto the toilet and raises them back up again to their feet, doing so under power with a smooth action and utilizing a “sit-to-stand” motion. This motion is recognized as the most efficient way of getting to one’s feet as it allows the application of the body’s major muscle groups in the correct order. It mimics the rise motion of most “rise and recline” armchairs so is a familiar movement for many people. It therefore allows people to toilet independently or with reduced care while at the same time minimizing the risk of a fall or getting stuck.
- Lowers you under power from a standing position until you are over the toilet
- Raises you back up under power from a sitting position
- Utilises an anatomically correct “sit-to-stand” motion
- Use over your own toilet with no works required
- Proper oval shaped opening allowing for easy toileting
- Quick and easy to set up
- Safely use the toilet on your own or with reduced care
- Reduce the risk of falls and associated injuries, and reduce the chances of being unable to get off the toilet
- Can also be used as a commode
- Use over shower toilets such as Geberit and Clos-o-Mat, and is also compatible with Bio Bidet
- Lift Seat Home safe working load is 146 kg
Carbon fiber composites are among the Iightest and strongest structural materials widely used in various applications from aerospace to marine structures. It has a strength to weight ratio 5 times that of steel and can be produced in complex shapes and various beautiful designs. It has an exceptional durability and chemical resistance.
Carborun wheelchairs employ ultralight yet strong carbon fiber chassis, combined with a beautiful and head-turning design. Overall wheelchair weight starts from 8 kg, with a transport weight (weight without rear wheels) of 5 kg.
Excellent agility and maneuverability of the wheelchair are among other key features of Carborun. The combination of design and craftsmanship results in an ultralight wheelchair that delivers on performance.
Made of a full carbon fiber frame, it adopts the latest technologies in each detail. It provides users with an elegant and smooth riding experience, unmatched by many of bestselling traditional wheelchairs.
| Frame , Footplate and Sideguard | Carbon fiber composite |
| Backrest Material | Aluminum |
| Frame Color | Custom |
| Front Wheel | Size: 3” – 4” – 5” |
| Rear Wheel | Size: 24” |
| Seat Width | 36 – 39 – 42 – 45 cm |
| Seat Depth | 38 – 40 – 42 – 44 cm |
| Footplate Distance | 33 – 35 – 37 – 39 – 41 – 43 – 45 cm |
| Backrest Height | 25 – 35 – 40 – 42 – 45 cm |
| Backrest Angle | 85 , 90 , 95 , 100 degree |
| Transport Weight | approx. 5.1 kg |
| Total Weight | approx. 8 kg |
| Maximum User Weight | approx. 130 kg |
The EZRide+ is the newest wheelchair power assist attachment. It is a unique mobility aid that quickly adds power assistance to most manual wheelchairs, transforming them into independently driven units. It gives wheelchair users the freedom to move about with confidence and power.
Using the Butterfly Clip accessory, the EZRide+ fits most foldable manual wheelchairs from 36cm – 56cm
EZRide+ can travel approximately 19-24 km on a single charge. This estimate is dependent on factors such as traveling speed, weight, terrain, and incline. The EZRide+ uses an 20cm wheel with an in-hub brushless 36V 350W electriac motor.
It takes approximately 4 hours from 0% battery to fully charged. It is recommended charging the EZRide+ after each use or when the battery reaches 30%. The EZRide+ battery is a lithium-ion 36V 350 Wh 10.0 Ah battery.
Manoeuvrability: Turns in place and easily steers through narrow spaces
Compatibility: Easy to attach and detach to any manual wheelchairs from 36 cm to 56 cm wide
Long Range: 24 km and fast 4-hour charge
Safe: Amazingly stable, safe and secure
Smooth, Powerful & Fast: Comfortable ride on any occasion and place.
Ease to lift to car: Portable solution for car, sea and air travel
Turning Radius: 360 degrees
Speed: Eco (5 kph), Mid (10 kph) & High (19 kph)
Weight: 13.6 kgs
Capacity: 136 kgs
EZLift – Disabled Toilet Aid, Electric Lifting and Transfer Chair.
The long-lasting rechargeable lithium battery can last anywhere from 12 to 15 days before it needs to be charged again, and an optional mounted tray or cushioned seat may be added to make the EZLift Assist by Shield Innovations more functional. This is an ideal device to have in hospitals, outpatient centers, nursing homes, assisted living facilities, and other similar locations. With these added features the device can be used as a chair for meal times, writing, or simply relaxing while being transported to a different location.
These EZLift Assist may be used by people with mobility limitations who are unable to walk on their own, and by patients who are recovering from a recent surgical procedure, an accident, or an illness that left them with limited mobility.
Overall Width: 63.5 cm
Total Lifting Distance: 23 cm
Minimum Seat Height: 48 cm
Maximum Seat Height: 73 cm
Under-Seat Height: 45 cm
Power: 96W
Battery Life: 12-15 Days per Charge
Battery Type: Lithium Ion Battery
Rotating Casters: 360 degrees
Locking Casters: Yes
Self-Service Wheelchair Charging Stations
Self-Service Wheelchair Charging Stations are to make the maximum contribution in improving of lives of orthopedic disabled people to have more independence, freedom and ability to socialize.
- Modern, stylish city furniture design
- Reliable charging upto 3 times faster
- Embodies programmable Smart Charging Kit
- Self-Service Wheelchair Charging Stations are equipped with Amphenol charge connector, resistant to deformation
- Different models are available with Mono or Dual screen options
- For outdoor (solar power option) and indoor applications
- 7/24 uninterrupted, free, self-service, municipality service
- Enhancing the trust of people of determination in the municipality by eliminating the worry of “I will be stranded if the battery runs down”
- Informing and raising awareness about social responsibility
- Technological, stylish, illuminated, industrial design city furniture
- Functional charge kit suitable for each brand power wheelchair
- Remotely manageable, technological infrastructure for municipal announcements
- Sealed, steel housing suitable for outdoor use
- The system is grounded and completely secure
- Online update of software, remotely manageable system
Designed for use in emergency situations, where almost anyone could need to be evacuated, the evacuation chair is used to escape fires, terror attacks, power failures or even just because the lift is out of order. Evacuation chairs allow descending, ascending and horizontal escapes with quick and easy operation.
Important Information:
Evacuation chairs are tested for durability and confirmed by TUV certificate.
Materials used, have B1 flame retardant certificate (then the chair can be placed on the escape route – the lack of a certificate does not allow such a situation)
CE mark for compliance with Regulation (EU) 2017/745 of April 5, 2017.
FALCON evacuation chair has been designed to transport people in a sitting position up and down the stairs and on a level ground. The FALCON evacuation chair gives the opportunity to overcome the challenge of evacuating people with reduced mobility from a building in the event of a fire or other emergency. The product is an indispensable solution in the event of a power failure, maintenance or justified incidents preventing the use of the elevator in the facility. People in the facility can easily and safely use this product to transport or evacuate people who are (or may become) incapable of standard use of the escape routes.
- Suitable for downward and upward transportation
- Handles for carrying up stairs and over obstacles
- Belts to secure the person being transported
- Adjustable backrest with head protection
- Can be free-standing or wall-mounted
- Sturdy, comfortable handle
- Locking rear wheels
- Friction-controlled, high-strength straps
- Made of canvas-reinforced rubber
- Stair lock in integrated footrest to eliminate the possibility of the chair tipping over.
Falcon Specification
| Dimensions | Folded | Unfolded |
|---|---|---|
| Height | 1170 mm | 1630 mm |
| Width | 290 mm | 500-525 mm |
| Weight | 15.5 kg | |
| Material (frame) | Steel and aluminium | |
| Max Load Capacity | 210 kg |
ROBIN evacuation chair is the perfect solution for the evacuation of people with special needs up and down the stairs. It allows one person to safely and easily evacuate a person down stairs in the event of an emergency or when elevators cannot be used.
- Suitable for downward transportation
- Ultralight and easy to use
- Can be freestanding or wall mounted
- Adjustable headrest/backrest
- Foldable rear axle
- Sturdy, comfortable handle
ROBIN Specification
| Dimensions | Folded |
Unfolded |
|---|---|---|
| Height | 1050 mm | 1600 mm |
| Width | 210 mm | 500 mm |
| Weight | 11 kg | |
| Material (frame) | Aluminium | |
| Max Capacity | 210 kg |
EVEREST evacuation chair electric chair allows one person with minimal effort to safely and easily evacuate a person with limited ability up and down stairs in the event of an emergency or when elevators cannot be used.
- Telesopic extendable handle: The designed solution allows the handle to be pulled out to the desired height
- Headrest: The headrest with the instruction manual is on the back
- Safety belt: The two rows of belts used guarantee the safety of the evacuated person
- Rubber track shoes: They provide grip even in difficult conditions
- Material (frame): Steel and aluminium
- Carrying handles: Extendable carrying handles
- Footrest: Comfortable fold-out footrest
- Wheels: Rubber wheels with a brake
- The motor has a so-called “clutch” which allows you to use the of the chair after removing/discharging the battery
EVEREST evacuation chair comes complete with:
- 2 x Wall mounting bracket
- 1 x Operating instructions
- 1 x Battery
- 1 x Charger
In addition, the EVEREST chair can be retrofitted with the following accessories: Protective cover or metal cabinet.
EVEREST Specification
| Dimensions | Folded | Unfolded |
|---|---|---|
| Height | 1080 mm | 1270, 1460, 1640 mm |
| Width | 242 mm | 1050 mm |
| Weight | 34 kg | |
| Material (frame) | Aluminium | |
| Max capacity | 210 kg |
Evacuation Mattresses and Mats are used during emergencies such as fire accidents or earthquakes for evacuation of people with restricted mobility through the staircase especially in buildings with narrow or spiral staircases where evacuation chairs cannot be used. It is also useful for evacuation of persons who are unconscious or who may find it difficult to get into the evacuation chair.
Who are the evacuation mats and mattresses intended for?
For people with reduced mobility, including:
- with mobility limitations
- with hearing impairment
- with visual impairments
- of limited awareness
Evacuation mats and mattresses should be especially used in buildings where:
- staircases are narrow or spiral (e.g. treatment staircases)
- hard-to-reach places and sharp edges, e.g. in production halls
We offer full range of evacuation mattresses, mats, sheets and evacuation stretcher – sheets.
Evacuation Mattresses and Mats are used during emergencies such as fire accidents or earthquakes for evacuation of people with restricted mobility through the staircase especially in buildings with narrow or spiral staircases where evacuation chairs cannot be used. It is also useful for evacuation of persons who are unconscious or who may find it difficult to get into the evacuation chair.
Who are the evacuation mats and mattresses intended for?
For people with reduced mobility, including:
- with mobility limitations
- with hearing impairment
- with visual impairments
- of limited awareness
Evacuation mats and mattresses should be especially used in buildings where:
- staircases are narrow or spiral (e.g. treatment staircases)
- hard-to-reach places and sharp edges, e.g. in production halls
We offer full range of evacuation mattresses, mats, sheets and evacuation stretcher – sheets.
It is designed for transporting people in a lying position on stairs and on horizontal ground up to a weight of 210kg, with additional head protection. It allows two people to safely and easily evacuate a person with limited mobility from stairs in the event of an emergency. Ideal for nursing homes and where people cannot use evacuation chairs (including people who are lying down, after surgery, mentally unstable).
- Soft foam to cushion off-road irregularities
- The underside of the mattress is made of Cordura® – a highly abrasion-resistant material
- Material for head protection in the black part made of 80% polyamide / 20% polyester
- Dimensions 210 x 60 x 7 cm
- Straps on the side of the head and feet to allow transportation
- Weight 6.5 kg
- Maximum load capacity 210 kg
- Head stabilizers can be easily adjusted with Velcro fasteners
- Head and chin straps keep the head securely in place
- The mattress has an additional wall-mounted cover as an option
- Strong Velcro straps that form a “cocoon” secure the evacuee from shifting
- Additional straps secure the person from moving around
- Has a germicidal coating
- TUV certificate – Tested product
- Product made of flame retardant material – B1
Mobi-mat Beach Accessibility Mats
Beautiful, high quality, nonslip, on trend Mobi-mat ® designed for beaches, fishing peers, picnic areas, parks, condos, hotels, coastal resorts to assist people with restricted mobility, walkers and elderly visitors or parents with strollers.
Available in various colors with white stripes for people with visual impairments, the ‘soft feel’ Outdoor Mobi-Mat® is UV, Water and Mildew Resistant and ‘mix and match’ beautifully together to create the ‘WOW’ factor on any beach, park, trail, and outdoor events. Why not transform your beach into an accessible friendly place today!
- Color: Blue Jay, Golden Sand
- Weight: 1.3kg/m2
- Width: 1.53m or 1.98m
- Length: 5m, 10m, 15.2m, 25m, 30.4m
- Customised Length: On request
- Can be used on: Sand
- 100% Non-slip surface
- Comfortable for barefoot users
- Durable thanks to its unique 3D patented design
- Quick installation
- Permeable: Does not retain sand or water
- 100% recyclable
ADA/ABA and Motorised Wheelchair Compliant:
Firm, safe and stable, easy for any type of wheelchair, stroller or walker to manoeuvre on – providing a smooth continuous surface without gaps. Highly resistant with tensile strength of +120kN/m. Suitable for small vehicle traffic.
Environmentally Friendly:
Made of 100% recycled polyester, Mobi-Mat® contributes to the environment by utilising recycled plastics.
Safe and Cool Pathway:
Cool surface: permeability and 3-D design provide a comfortable surface to barefoot and people with restricted mobility. UV and weather resistant : -104°F (-40°C) / +176°F (+80°C).
Lightweight and Easy Installation:
Mobi-Mat® is only 1.3kg/m2, facilitating installation and retrieval of a 15m long section by two persons in ten minutes.
Choice of Colors:
Golden Sand and Blue Jay – Perfect match with natural environment. Unique white stripes designed to guide people with visual impairments and create a safe guidance for social distancing or a two way traffic.
Low Maintenance:
The Mobi-Mat® permeable structure allows sand to filter through, without sinking into the sand. Mobi-Mat® is easily maintained by sweeping any excess sand build up with a broom or with a leaf blower.
Mobi-Chair® – Floating Beach Wheelchair
Mobi-Chair® is a high quality floating beach wheelchair that floats thanks to its floatational wheels and armrests. Mobi-Chair® floating beach wheelchair is the ultimate partner for leisure time and entertainment.
Mobi-Chair® floating beach wheelchair is designed with everyone in mind: wheelchair users, people with special needs, or even children can benefit from the convenience, portability and comfort of the Mobi-Chair®.
The aluminum frame and stainless steel parts are corrosion free from salt water and the floatational wheels and armrests provide an unprecedented experience due to their stable buoyant design. The Mobi-Chair® is suitable for use at the beach and in swimming pools.
- Height: 127 cm
- Length: 152 cm
- Width: 107 cm
- Weight: 30kg
- Max Weight Capacity: 135 kg
- Min Weight Capacity: 25kg
- Very Good Float ability
- Easy assembled
- 3 seating positions
- Easy storage (6 parts)
- Safety Belt
- Quick Maintenance
The Mobi-Chair® is physically and visually pleasing due to its quality and appearance. Users are able to recline in a comfortable position while riding, bathing or sitting for extended periods of time. The attractive fabric is non-allergenic, UV resistant, water resistant and ventilated for quick drying.
Manoeuvrability:
Mobi-Chair® provides a comfortable ride. The rubber pneumatic tires absorb the shock and discomfort caused by rugged terrain, and it provides easy mobility through sand and other rough surfaces.
Floatability:
The armrests and wheels are comprised of floatation materials that enable balance while bathing in the water. The integrated handles on the armrests provide added stability while enjoying the ride on land or in the water.
Convenient to Transport and Store:
Transportation and storage is convenient. Mobi-Chair® is quickly assembled or disassembled by operating the quick release pins and joints without tools. It can easily fit into any vehicle.
Sea
Sand
Lake
Swimming Pool
The Tiralo 2 – Floating Beach Wheelchair
An amphibious chair: The Tiralo 2 is a beach chair designed for people with reduced mobility. It rides on the beach or floats on the water, and goes from one to the other without requiring any transformation. It moves smoothly on any type of surface, sand or pebbles, and carries an assisted user to the beach, where he or she can have a ride or swim in calm water.
Simple and practical: The Tiralo 2 is particularly easy to manoeuvre. A single person can manoeuvre its articulated fork and pull the Tiralo 2 down an access ramp, to the beach and all the way to the sea. The low pressure wheels serve as shock absorbers. Its new design and ergonomics make for extended use and unparalleled comfort. The users can easily transfer to fully reclining one-piece float.
Reliable and safe: The Tiralo 2 can be used by individuals weighing up to 130 kg. When floating, the users must be assisted at all times by an able-bodied person who will make sure that safety instructions are followed. It is best to float in calm waters and remain in supervised swimming areas. Wearing a life jacket is recommended.
Ingenious and robust: Invented and manufactured by people of determination, the Tiralo 2 is particularly resistant:
- Its aluminium frame does not rust
- Its float has roto-molded plastic armrests
- Its low pressure wheels with no bearings do not seize up
No maintenance is needed. After each use, simply hose down with water and it’s ready to go again!
- Total Width: 107 cm, Seat width: 50 cm
- Seat Height: 45 cm
- Seat Back: 90 cm
- Total length with tow bar folded out: 220 cm
- Weight 31 kg
- Maximum load 130 kg
- Minimum load 25 kg
Product Features:
- Frame: aluminium and stainless steel
- Fabric: woven hypoallergenic nylon net
- Armrests: roto-molded one piece float
- Wheels: 3 identical low-pressure wheels; the front wheel is articulated
- Mobility : chair pulled by a tow bar fitted with a handle
- Easy to assemble and maintain: with its frame and back made of reinforced aluminium, its prime quality is its robustness
- It has very few parts and is delivered almost fully assembled; in just a few minutes you’ll be ready to enjoy the pleasures of the sea!
An accompanying person pulls and steers the three-wheeled chair with the help of a tow bar fitted with a handle. The low-pressure wheels make it easy to pull it over sand and pebbles.
It Floats!
Owing to its one-piece float/armrests, guard and wheels, the Tiralo 2 floats and offers optimum comfort for floating in a sitting position. The armrests with handles keep the chair stable and have a clever, innovative system that makes use of the water pressure to automatically lock the float in place for swimming.
It is Also a Sun-Bathing Chair!
With its highly ergonomic and comfort-focused design, the Tiralo 2 makes it easy for the user to get from their wheelchair to the Tiralo 2, and from the amphibious chair to the sand. It can be used for extended periods of time, in great comfort, owing to the materials it is made of and its rounded, user-friendly design. The seat is made of a hypoallergenic material, agreeable to the touch, that fits to the user’s body and lets sand and water through. The armrests and wheels are comprised of floatation materials that enable balance while bathing in the water. The integrated handles on the armrests provide added stability while enjoying the ride on land or in the water.
- Ideal for public and private beaches
- Easy installation
- Remains onsite as a standalone system
- Solar powered
- Ideal for hotels and waterfront businesses
- No more than 15 minutes for someone to place it on the beach or dismantle it and store it in the storage room
- It can be removed from the beach without dismantling it and no one needs to get wet
- Ideal for tidal changes greater than 18″/ .5M & sudden changes in weather conditions.
Autonomous Sea Access
Remote Controlled
Artificial Intelligence
Environment Friendly
Self-diagnosis System
Adapted to Beaches
The NART Pool Lifts are specially designed for safe transfer of elderly people and people with restricted mobility to the water. The NART Pool Lifts are suitable for use in outdoor or indoor swimming pools at the Hotels, at Hydrotherapy (water therapy) pools, at Spa-Thermal Centers and Sports Facilities. The Pool Lifts are easily assembled providing easy pool access without the need for assistance or companions.
Stationary Pool Lift System: Installed Option
Portable Pool Lift System: Nart Shark Pool Lift
Stationary Pool Lift System
- Fixed Pool Lift has a carrying capacity of 150 kg.
- Fixed Pool Lift can be used in all indoor and outdoor pools.
- Made of stainless 304 steel and is not affected by pool chlorine or sea water.
- Fixed Pool Lift is compatible with all pools and can be assembled in 1 hour.
- Fixed Pool Lift Pool Lift works with battery-actuator, which is a maintenance-free system and does not require old systems such as electricity or water pressure.
- During the installation of the water-pressure fixed pool lift, an appropriate mounting hole must be drilled on the edge of the pool while such drilling – this is not required in the Fixed Pool Lift.
- Safe and fast operation is provided with a simple fixation from 4 points.
- Battery powered systems operate a little faster than water pressure elevators.
- If there is a weight increase in battery powered systems, faster and safer transfer is still provided without decreasing the up and down speed of access to water.
Mobile Pool Lift System: Nart Shark Pool Lift
- Mobile Pool Lift has a carrying capacity of 135 kg, with total weight 200 kg.
- Mobile Pool Lift can be used in all indoor and outdoor pools.
- Body is made of ST-52 steel and zinc plated and painted with electrostatic paint. The parts entering the water are 304 stainless steel and coated with electrostatic and is not affected by pool chlorine water.
- Mobile Pool Lift has:
– detachable and rechargeable battery with charge indicator (both on the device and on the charger)
– emergency stop button
– external charging adapter
– medical rustproof wheels, suitable for wet surfaces, they are water resistant with a closed type bearing thus reducing the risk of accident
– braked rear wheels, vacuum emergency stoppers are located behind the front wheels.
– foldable armrest and footrest - Stroke length 1250 mm. (610 mm above water 640 mm in water).
- Landing time to the pool is 45 seconds. The exit time from the pool is 55 seconds.
It happens again and again that buses do not stop at the bus stop, be it because of location, heavy fog, rain or other reasons.
With SeeUs, Swiss Innovation Lab helps you to avoid leaving any waiting passengers behind. With its integrated LED lights and wireless communication, SeeUs informs approaching buses of passengers waiting as well as if boarding support is required thus increasing driver awareness and accessibility.
SeeUs Hardware – Robust, Powerful & Easy to Install
SeeUs is made of robust IP65 sheet metal housing.
Thanks to its rotating design, the LED unit is always pointing in the right direction while the solar panel can be optimized for best angle. SeeUs is powered by solar panel so there is no need for any power installation. As a backup it is equipped with a LiFeYPo4 battery for up to 3 months operation.
Thanks to the optional NB-IoT connectivity, the unit can be connected to the SeeUs cloud based monitoring system assuring that everything is working properly.
SeeUs can be configured with different LEDs ranging from 23mm to 88mm in diameter. The LEDs can be adjusted in intensity, dimmed at night and programmed with different flashing patterns. LEDs according to EN 12352 is available as option. Also available as options are LEDs on both sides as well as LED for providing light at a station.
- SeeUs has been designed to increase driver awareness and make public transport more efficient and accessible.
- The system consists of the Master and LED Unit, the Push Button and the optional Vehicle Unit.
- The Push Button activates the LED Unit which informs approaching buses of the stop request. In addition to the optically flashing LEDs, the device can also exchange information over Bluetooth with approaching buses.
- SeeUs increases awareness and reduces stress for the driver. It makes sure that the driver is informed of waiting passengers and if boarding support is required. With this the overall travel experience is improved.
Applications
Increasing Driver Awareness
SeeUs has been designed to increase driver awareness and make public transport more efficient and accessible. The system basically consists of the SeeUs Control and LED Unit, the Push Button and the optional Vehicle Unit.
The Push Button activates the LED Unit which informs approaching buses of the stop and/or support request(s). In addition to the optically flashing LEDs, the device can also send the request via our cloud server to the approaching buses (requires either vehicle unit or server to server connectivity).
SeeUs increases awareness and reduces stress for the driver. It makes sure that the driver is informed of waiting passengers and if boarding support is required. With this the overall travel experience is improved.
Real-Time Passenger Information
To further enhance the travel experience, we are adding real-time bus departure information to SeeUs. Leveraging on the existing connectivity and open data API integration in combination with the latest e-paper technology we can offer both integrated and standalone real-time display solutions.
The current lineup is based on 7.5” e-paper with 800 x 480 resolution and a GW100 protective glass. It comes with front light and partial refresh and supports operation in -25 to +70 degrees Celsius. Power is taken from the SeeUs solar panel and rechargeable battery.
SeeUs Central Unit
SeeUs Pushbutton
SeeUs Vehicle Unit
Keeping the driver informed
The SeeUs vehicle unit is an android app running in kiosk mode. It detects broadcasts from SeeUs stops and informs the driver accordingly i.e. waiting passengers and if support is requested.
It also reacts on onboard activation from the SeeUs app enabling a passenger to trigger stop and deboarding support directly from the app. The communication is made possible via an integrated Bluetooth Low Energy module.
On project basis the vehicle unit can also be made ITXPT compatible.
Multiple triggering device choices – tailored to your use.
SeeUs supports a wide range of triggering devices including pushbutton, infrared presence detector, tag and MyAid app for smartphones. All of these devices work with Bluetooth Low Energy (BLE) and are battery powered. This caters for flexible and easy installation.
The SeeUs Pushbutton enclosure is made in strong polycarbonate and is available with one or two pushbuttons. Battery life is over 10 years.
The SeeUs Tag comes with a replaceable battery allowing 3 years of operation. It has an integrated accelerometer for optimized broadcasting.
Modern Mobility System
The European population is ageing. There will be 75 million people over the age of 65 in Europe in 2020, and 88 million in 2030. The share of people aged 65+ should increase from 17.5% of the population in 2010 to 29.5% in 2060.
This requires reconsidering existing mobility systems in order to meet the needs of older people and help to combat social exclusion and support independent living especially for those with reduced mobility.
For elderly and disabled, the SeeUs system can be complemented with the SeeUs App. With this the LED unit can be triggered just by being in proximity of predefined bus stops automatically informing favorite bus lines about special needs such as boarding assistance. The SeeUs App also supports stop and support requests to be initiated from the app while onboard. Part of the functionality is also available as a bluetooth tag.
Handling Pick-up Requests from a Specific Stop
Thanks to the optional NB-IoT communication module, status and events can be uploaded to the SeeUs Monitoring System in real-time. With this SeeUs can handle pick-up requests from a specific stop and generate notifications / commands triggering execution. For example, autonomous busses can be triggered for pick-up at a specific station. Another example is Public transport on sea.
Typically, public transport on sea is relying on old fashion semaphores to flag that someone is to be picked up at a specific dock. With SeeUs such requests can be made either via push button or App triggering notification to approaching ferries.
For the latter use case, SeeUs improves fuel economy and reduces wear on engines thus increases the life of ships. It shortens travel time and allows time tables to be optimized. Last but not the least, it has a positive environmental impact by contributing to reducing noise and pollution.
Writing aids comprise of a diverse assortment of adaptive and assistive products and equipment that enable children, adults and seniors to more easily write. These aids encompass weighted pens and pencils, weighted universal grips/holders, soft grips, steadying writing devices, triangular grips, retractable pens and pencils, magnifiers, etc..
Writing aids are developed to help a diverse range of potential users. Individuals with a weakened grasp or other hand impairments such as missing digits, injury, arthritis, decreased dexterity, limited coordination, neurological disorders, spasticity, tremors, hand fatigue and pain may be able to find exactly the right help they’ve needed to be able to write again, or for the first time. Writing aids subsume a plethora of various grips enabling potential users many choices to fulfill their unique requirements and special needs.
The Ergo-Sof PenAgain is an ergonomic writing pen with a soft silicone coating that adds extra comfort. The “Y”-shaped design helps to reduce the need to squeeze the pen tightly when writing, and decreases gripping strain. The Ergo-Sof PenAgain has an ergonomic index finger cradle which allows the natural weight of the user’s own hand to gently rest. Pressure is applied to the writing surface with gravity, instead of pressure from the fingers. The pen helps to steady the hand and actually engages the whole arm in the writing process, greatly reducing hand fatigue. People with Arthritis, Writer’s cramp, Carpal Tunnel Syndrome, calluses, RSI, and hand weakness will find the PenAgain provides increased comfort for writing.
The Pencil Grip is the original ergonomic writing aid. Writing becomes easy and natural. The Pencil Grip improves handwriting, helps to give more control, and reduces hand fatigue. Its unique, patented design gently encourages the fingers and hand to rest in the proper position for gripping – The Tripod Grip. These hand grips feel natural because of its ergonomic design and soft, flexible, latex-free material. The unique shape is designed to be “one size fits all” to help the hands of kids & adults, & works for both righties & lefties.
Non-slip Clipboards assist people with restricted mobility to handle the paperwork in a more comfortable manner.
Fire door holders operate using a magnet, which holds the door open. In the event of a fire the magnet is released and the door closes.
As fire doors should be kept closed to prevent fire or smoke spreading throughout a building, this can cause problems in buildings where there is a lot of movement of people e.g. education establishments, hospitals, hotels.
Rather than illegally wedging open fire doors (which have automatic closers fitted) to ease access, fire door holders will safely hold open a door and release it in the event of a fire.
The trigger for the magnet releasing is a fire alarm; the fire alarm will communicate differently depending on the mechanism you use. Hardwired systems are actually wired into the building’s fire panel. In the event of a fire, the power supply is withdrawn and the magnet releases. Therefore, the door will also close in the event of power failure, meaning they are fail safe. Hardwired systems require an electrical engineer to install them. The radio systems are category A compliant, as defined by BS7273-4.
Door holders help venues to comply with the Equality Act 2010 with regard to the provision of disabled access. Geofire designs and manufactures a range of acoustic, radio controlled or hard wired fire door holders.
Hardwired systems are actually wired into the building’s fire panel. In the event of a fire, the power supply is withdrawn and the magnet releases. Therefore, the door will also close in the event of power failure, meaning they are fail safe. Hardwired systems require an electrical engineer to install them. The Geofire hardwired systems are category A compliant by BS7273-4.
Radio systems connect wirelessly to a controller via radio signals. This controller is mains powered and easily wired into the existing fire panel and therefore does not alter the building infrastructure. In the event of a fire, the controller is triggered into alarm mode by the fire panel and signals the holders to release. The Salamander radio systems are category A compliant, as defined by BS7273-4.
Acoustic systems are a cost effective plug and play type solution, which listens for the fire alarm. Geofire’s acoustic solution, the Agrippa range, is the first of its kind on the market; it listens and learns your specific fire alarm releasing the magnet when it hears a particular sound. This differs from others on the market, which release the magnet on hearing any loud noise. This significantly reduces false activations. The Agrippa range can be fitted by anyone; it involves fitting the unit and keeper plate to the wall behind the door and performing a learn procedure. The Agrippa acoustic systems are category B compliant, as defined by BS7273-4.
The Agrippa magnetic fire door holder is a battery-powered device used to legally hold open internal fire doors. The device is fitted to the wall and a keeper plate is fitted to the top of the door to ensure there is no damage to the floor and to prevent door warping. The Agrippa magnetic fire door holder can also be floor mounted if required. The Agrippa holder uses a magnet to hold the door open to ease access during the day, in the event of the fire alarm sounding, the door is automatically closed to prevent the spread of smoke and flames. The red button on the device allows users to manually close the door if needed. The holder is easy to install and maintain due to its LED display screen and daily timed release option, used to ensure that all fire doors are closed at the end of the day. The Agrippa door holder will not hold the door open if the batteries run out of power and features a low battery warning. The Agrippa holder uses ‘listen and learn’ technology to record the specific sound of the building’s alarm, ensuring the doors will close upon hearing this sound, rather than reacting to loud noises such as school children or vacuum cleaners. The Agrippa device can be fitted to internal fire doors in less than 10 minutes.
Salamander Radio Controlled Fire Door Holder
The Salamander radio controlled fire door holder is a category A, battery-powered, magnetic fire door holder controlled by radio signals from a central controller. Innovative wire free radio technology means quick and easy fitting with no more unsightly cables and no need for major renovation. The Salamander system holds up to 99 fire doors in the open position and is suitable for fire doors at the top of stairwells. Salamander radio-controlled fire door holders can be relocated to different doors as the building layout changes. Its large range of mounting options includes stands, chain mounted keepers and floor mounting brackets. Booster units can be easily added to cover larger installations.
The doormouse fire door holder is a hard-wired device to legally hold open internal fire doors. The doormouse is fitted with an integral manual release button, allowing the door to be closed without operating the fire alarm. The doormouse fire door holder is surface mounted, and is housed in a white fire resistant ABS casing. Type tested to meet EN1155, knockouts for surface or back cable entry, and a spring loaded pin to give zero residual holding force when de-energised. The 230 Vac unit includes a filter for EMC emissions and is CE marked. Internal diodes dissipate any “back EMF” on switch-off, reducing wear at the control unit.
The conquest magnet is built around a robust fascia plate for flush mounting on a standard electrical back box. A spring-loaded pin ensures zero residual holding force. For surface mounting, the conquest fire door holder is supplied with a matching pressed steel surface mount box with 20mm knockouts. The 230 Vac unit includes a filter for EMC emissions. Internal diodes dissipate any “back EMF” on switch-off, reducing wear at the control unit. The Conquest fire door holder is fitted with an integral release button and supplied complete with an adjustable keeper plate and instructions as standard.
The floor mounted fire door holder is designed to hold fire doors for ease of access releasing them when an alarm is triggered. They are ideally suited to applications where maximum protection is needed against vandalism or accidental damage. The floor mounted fire door holder is also suited to applications where the door is not opening near a wall. The holder features a rugged cast aluminum housing, a holding magnet with integral ejection pin and a manual release switch. Cable entry can be through the base or through a 20mm hole provided in the housing for surface mounted conduit or pyro. Also available in heavy duty switch versions and alternative keeper designs and voltages. Every fire door holder is supplied complete with a door mounting keeper plate.
The universal fire door holder can be used for many different door holding applications and can be floor or ceiling mounted. The stand and adjustable head are fabricated from steel providing a very robust structure. A moulded cover is included to conceal the mounting fixings once the holder is fitted. The stand is available in two standard lengths, but can easily be cut down to shorter lengths on site. Special lengths and voltages are available to order.
The weatherproof fire door holder is designed to hold open fire doors for convenient access through busy doorways and release the door to close when an alarm is triggered. Designed for wall mounting, the weatherproof fire door holder is supplied complete with a keeper plate for fixing to the fire door. Both parts are constructed from steel and are zinc plated. The strong construction makes this magnet ideal for most applications in all types of building. The high level of ingress protection also means that this magnet is particularly suited to use outdoors and in maritime applications. Electrical connection is via an IP65 connector supplied with the magnet. A wide range of AC and DC voltages are available to order.
Door Closers
Fire door closers will hold open a fire door when required to ease access and automatically close the door in the event of a fire. Fire doors should be kept closed to prevent fire or smoke spreading throughout a building. All fire doors should be fitted with a door closer. Geofire’s door closers are a complete door holder and closer in one door-mounted unit. Geofire designs and manufactures a radio controlled fire door closer and an acoustic fire door closer, as well as a mechanical closer that will simply close the door after opening.
Geofire fire door closers operate using magnets, the magnet will resist closure of the door until it is released in the event of a fire. The trigger for the magnet releasing is a fire alarm; the fire alarm will communicate differently depending on the mechanism you use.
Radio systems connect wirelessly to a controller via radio signals. This controller is mains powered and easily wired into the existing fire panel and therefore does not alter the building infrastructure. In the event of a fire, the controller is triggered into alarm mode by the fire panel and signals the holders to release. The Salamander radio systems are category A compliant, as defined by BS7273-4.
Acoustic systems are a cost effective plug and play type solution, which listens for the fire alarm. Geofire’s acoustic solution, the Agrippa range, is the first of its kind on the market; it listens and learns your specific fire alarm releasing the magnet when it hears a particular sound. This differs from others on the market, which release the magnet on hearing any loud noise. This significantly reduces false activations. The Agrippa range can be fitted by anyone; it involves fitting the unit and keeper plate to the wall behind the door and performing a learn procedure. The Agrippa acoustic systems are category C compliant, as defined by BS7273-4.
The Agrippa fire door closer is fitted in place of a traditional door closer to hold the fire door open in any position, whilst ensuring the door will close in the event of a fire. It is a ‘free-swing’ device which makes heavy fire doors resistance free, light and easy to move. The closer is battery-powered and features an LED display screen to make maintenance easy. The screen will display a low battery warning and can also be used to set up a daily timed release to make sure all fire doors are closed at night. The closer will not hold the door if the batteries run out of power. The Agrippa fire door closer enables the door to be held open in any position within 60-105 degrees; this allows users to hold the door slightly open, which prevents feelings of isolation in a care home, for example. The red button on the unit is used to manually close the door. Now dual mode – Ready to protect straight from the box, ready to learn the sound of your fire alarm. The Agrippa closer uses ‘listen and learn’ technology to record the specific sound of the building’s alarm, ensuring the doors will close upon hearing this sound, rather than reacting to loud noises such as school children or vacuum cleaners. The Agrippa fire door closer is particularly suitable in environments where minimal disruption during installation is desired such as hospitals, schools and hotels.
The Salamander radio controlled fire door closer holds open and safely closes the fire door in the event of a fault or fire. Salamander is a system of battery-powered, magnetic fire door holders controlled by radio signals from a central controller. Holding fire doors open:
- Ensures ease of access throughout the building
- Helps to prevent wear and tear of expensive fire doors
- Improves ventilation
Restriction-free movement around the building in line with the disability provision of the Equality Act 2010. Geofire’s Salamander products can only be activated by the fire alarm and are therefore suitable for noisy environments.
